Activate FulcrumLSClient manually

When a client is using file based licenses FulcrumLSClient must be activated manually.

1. Save your serial number to text file (for example serial.txt) to Activation directory

2. Start Command line as administrator (right mouse button on "Command Prompt" and select option "Run as Administrator").

3. In command line opened type "CD PATH" (without quotes), where PATH is the full path of activation folder and press Enter

4. If serial number was saved to serial.txt file then type the following in command line "id_gen.exe serial.txt" (without quotes) and press Enter

5. The file neurotechnology.id should be generated if everything is OK.

6. Use our website http://www.neurotechnology.com/cgi-bin/nla.cgi to upload hardware id that was generated (provide correct e-mail address)

7. Save all received license file to your Activation folder

8. If pgd.conf does not exist in Activation folder - create it and modify to the following lines:
Mode = single

LicenseFile = FULL_PATH_TO_LICENSE
Where FULL_PATH_TO_LICENSE is the full path to the license file (*.lic).
You can add as many licenses as you want

9. Save modified pgd.conf and execute "pg.exe -install" (without quotes. Do not copy paste but type in) from command line (how to start command line it is described in step 2).

10. If licensing service will start, you will see the following lines in command line:
Service unregistered
Service registered
Everything should be licensed now.